diff --git a/CL4NX_Profile.xml b/CL4NX_Profile.xml
new file mode 100644
index 0000000..d160b2a
--- /dev/null
+++ b/CL4NX_Profile.xml
@@ -0,0 +1,57 @@
+<?xml version="1.0" encoding="utf-8" ?>
+<Model value="CL4NX Series" >
+<PrintMethod value="Thermal Transfer" />
+<PrintResolution value="0" />
+<PrintSpeed value="6(inch/sec) 150(mm/sec)" />
+<PrintMode value="Tear off" />
+<CutterMode value="Motion 1 (Thermal head position)" />
+<DispenseMode value="Motion 1 (Thermal head  position)" />
+<LinerlessMode value="Motion 2 (Dispenser position)" />
+<PrintDarkness value="A" />
+<DarknessLevel value="Level 5" />
+<SensorType value="GAP" />
+<ZeroSlash value="Enabled" />
+<KanjiCode value="GB18030" />
+<InitialFeed value="Enabled" />
+<ProportionPitch value="Proportional pitch" />
+<LabelHeight value="315" />
+<LabelWidth value="520" />
+<VerticalStart value="0" />
+<HorizontalStart value="5" />
+<LabelPitchOffset value="0" />
+<TearOffset value="0" />
+<CutterOffset value="0" />
+<DispenserOffset value="0" />
+<Language value="Korean" />
+<HeadCheckMode value="Specify number of pages" />
+<HeadCheck value="Disable" />
+<HeadCheckPage value="1" />
+<PowerSaving value="0" />
+<OptionTime value="0" />
+<AllQty value="Disable" />
+<TimeZone value="Asia/Seoul (+09:00)" />
+<BuzzerSound value="Volume medium" />
+<AppMode value="AUTO" />
+<AppModeAuto value="SZPL" />
+<Reprint value="Enable" />
+<PEND_TYPE value="GAP" />
+<EJECT_CUT value="0" />
+<MEDIA_CHECK value="Disable" />
+<AUTO_MEASURE value="Enable" />
+<AUTO_ONLINE value="Enable" />
+<ONLINE_FEED value="Disable" />
+<IGNORE_CRLF value="Do not remove CR/LF" />
+<BYTECOMMAND value="Disable" />
+<RB_NEND value="Enable" />
+<PRIORITY value="Prioritize command" />
+<PRINT_AREA value="Normal" />
+<HEX_DUMP_MODE value="Disable" />
+<CALENDAR_CHECK value="Disable" />
+<AC_POWERON value="Disable" />
+<BV_MODE value="Disable" />
+<BV_START_POSITION value="72" />
+<BV_VOID_PRINT value="Disable" />
+<BV_RETRY_COUNT value="0" />
+<BV_HOST_NOTIFICATION value="Disable" />
+<UNIT value="dot" />
+</Model>