Refactor: Rename NanoKVM to BatchuKVM and update server URL

kvmapp/system/init.d/S98tailscaled

@@ -0,0 +1,120 @@
+#!/bin/sh
+
+DAEMON="tailscaled"
+PIDFILE="/var/run/$DAEMON.pid"
+
+# Set the port to listen on for incoming VPN packets.
+# Remote nodes will automatically be informed about the new port number,
+# but you might want to configure this in order to set external firewall
+# settings.
+PORT="41641"
+
+# Extra flags you might want to pass to tailscaled.
+FLAGS=""
+
+# You need tailscaled at /usr/sbin to server, and tailscale at /usr/bin to operate
+# STATIC version needed. Download page at https://pkgs.tailscale.com/stable/#static
+PKG_URL_LATEST="https://pkgs.tailscale.com/stable/tailscale_latest_riscv64.tgz"
+[ ! -x /usr/sbin/$DAEMON ] &&
+    echo "/usr/sbin/$DAEMON not found, please download it from $PKG_URL_LATEST" &&
+    echo "Then unpack it, copy $DAEMON to /usr/sbin and copy tailscale to /usr/bin" &&
+    exit 1
+VERSION=$(/usr/sbin/$DAEMON --version|sed -n '1p'|xargs echo -n)
+
+[ -x /usr/bin/tailscale ] || echo "/usr/bin/tailscale not found, your installation of tailscale may be broken"
+
+# just for those need forwarding
+[ ! -f /etc/sysctl.d/99-tailscale.conf ] &&
+    mkdir -p /etc/sysctl.d/ &&
+    echo "missing /etc/sysctl.d/99-tailscale.conf, try make it below:" &&
+    (tee /etc/sysctl.d/99-tailscale.conf <<EOF
+net.ipv4.ip_forward = 1
+net.ipv6.conf.all.forwarding = 1
+EOF
+    ) &&
+    echo "if this message repeats showing, please look at $0 if you need forwarding"
+
+case "$1" in
+        start)
+                if [ -f /etc/kvm/GOMEMLIMIT ]; then
+                     value=$(cat /etc/kvm/GOMEMLIMIT)
+                     export GOMEMLIMIT="${value}MiB"
+                else
+                     export GOMEMLIMIT=1024MiB
+                fi
+                
+                echo "GOMEMLIMIT set to ${GOMEMLIMIT}"
+                printf "Starting $DAEMON[$VERSION]: "
+                start-stop-daemon -S -bmq -p "$PIDFILE" -x "/usr/sbin/$DAEMON" -- \
+                    --state=/var/lib/tailscale/tailscaled.state \
+                    --socket=/var/run/tailscale/tailscaled.sock \
+                    --port=${PORT} \
+                    $FLAGS
+                if [ $? = 0 ]; then
+        		    echo "OK"
+        		    tailscale set --accept-dns=false
+        		    # example to make your nanoKVM an exit node
+        		    # tailscale set --advertise-exit-node --advertise-routes=192.168.0.0/16
+	            else
+		            echo "FAIL"
+	            fi
+                ;;
+        stop)
+                printf "Stopping $DAEMON: "
+                start-stop-daemon -K -p "$PIDFILE"
+                [ $? = 0 ]  && (echo "OK"; rm -f "$PIDFILE") || echo "FAIL"
+                printf "cleaning tailscaled: "
+                /usr/sbin/$DAEMON --cleanup &>/dev/null
+                [ $? = 0 ] && echo "OK" || echo "FAIL"
+                ;;
+        restart|reload)
+                $0 stop
+                $0 start
+                ;;
+        doc)
+                cat <<EOF
+To use tailscale, you need to meet these conditions below:
+  1. Both tailscale and tailscaled were installed.
+  2. At least one tailscale's account were registered.
+     (https://login.tailscale.com/start)
+  3. Your NanoKVM device must keep online.
+
+Then, follow the steps below:
+  1. Login in https://login.tailscale.com on your PC
+     to enter into yout admin console.
+  2. Run 'tailscale login' on your device, and copy the link showed
+     to open on your PC, and confirm the auth.
+  3. Congratulations, your NanoKVM device is now on the tailnet, try to
+     visit it from all your device which on the same tailnet.
+  4. run 'tailscale set --webclient' and manage your device
+     on the web interface from localnet and tailenet.
+
+Added: no more action to be repeat after your device reboot.
+EOF
+                echo ""
+                cat <<EOF
+为了正常使用 tailscale, 你需要满足以下几个条件：
+  1. tailscale 和 tailscaled 这两个静态链接的二进制程序
+     都已经正确安装在系统上。
+  2. 至少注册一个 tailscale 的帐号才能使用其服务。
+     (https://login.tailscale.com/start)
+  3. 你的 NanoKVM 设备必须保持在线。
+
+然后，跟着以下步骤操作：
+  1. 在你的电脑上登录 https://login.tailscale.com 以进入控制台。
+  2. 在你的 NanoKVM ssh 终端上执行 'tailscale login', 然后复制
+     出现的链接到浏览器上，登录并通过验证。
+  3. 祝贺，你的 NanoKVM 现在已经加入了 tailnet 然后你可以从任意
+     同样已加入同一 tailnet 的设备去访问你的 NanoKVM。
+  4. 执行 'tailscale set --webclient' 然后你就可以从 '局域网' 和
+     'tailnet' 来访问特定网页，用来管理你的设备。
+
+补充: 不需要重复上面的操作，哪怕你的设备重启过。
+EOF
+                ;;
+        *)
+                echo "Usage: $0 {start|stop|restart}"
+                exit 1
+esac
+
+exit 0